Enquiries ?

(required)

(required)

(required)

Your Message

ABSplus™ – P430

ABSplus is a true production-grade thermoplastic that is durable enough to perform virtually the same as production parts. When combined with Dimension 3D Printers, ABSplus is the ideal solution to printing 3D models in an office environment.

Mechanical Properties1

Test Method

English

Metric

Tensile Strength (Type 1, 0.125”, 0.2”/min) ASTM D638 5,300 psi 37 MPa
Tensile Modulus (Type 1, 0.125”, 0.2”/min) ASTM D638 330,000 psi 2,320 MPa
Tensile Elongation (Type 1, 0.125”, 0.2”/min) ASTM D638 3% 3%
Flexural Delamination ASTM D790 4,500 psi 31 MPa
Flexural Strength (Method 1, 0.05”/min) ASTM D790 7,600 psi 53 MPa
Flexural Modulus (Method 1, 0.05”/min) ASTM D790 320,000 psi 2,250 MPa
IZOD Impact, notched (Method A, 23°C) ASTM D256 2.0 ft-lb/in 106 J/m

Thermal Properties2

 Test Method

English

Metric

Heat Deflection (HDT) @ 66 psi ASTM D648 204°F 96°C
Heat Deflection (HDT) @ 264 psi ASTM D648 180°F 82°C
Glass Transition Temperature (Tg) DMA (SSYS) 226°F 108°C
Melt Point – – – – – – – – – Not Applicable3 Not Applicable3
Coefficient of Thermal Expansion ASTM E831 4.90E-05 in/in/°F – – – – – – – – –

Electrical Properties4

 Test Method

Value Range

Volume Resistivity ASTM D257 3.0x10e14 – 6.0x10e13 ohms
Dielectric Constant ASTM D150-98 2.9 – 2.6
Dissipation Factor ASTM D150-98 .0053 – .0046
Dielectric Strength ASTM D149-09, Method A 320 – 100 V/mm
Dielectric Strength IEC 60112 28.0 kV/mm

Other2

 Test Method

Value

Specific Gravity ASTM D792 1.04
Flame Classification UL94 HB

System Availability

Layer Thickness Capability

 Support Structure

 Available Colors

uPrint
uPrint Plus
Dimension Elite
Dimension SST 1200es
Dimension BST 1200es
0.013 inch (0.330 mm)
0.010 inch (0.254 mm)
0.007 inch (0.178 mm)5
Soluble Supports
Breakaway Supports
(BST 1200es only)
Ivory6
White
Black
Dark Grey
Red
Blue
Olive Green
Nectarine
Fluorescent Yellow

The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, test conditions, color etc. Actual values will vary with build conditions. Product specifications are subject to change without notice.

1Build orientation is on side long edge. 2Literature value unless otherwise noted. 3 Due to amorphous nature, material does not display a melting point. 4All Electrical Property values were generated from the average of test plaques built with default part density (sparse). Test plaques were 4.0 x 4.0 x 0.1 inches (102 x 102 x 2.5 mm) and were built both in the flat and vertical orientation. The range of values is mostly the result of the difference in properties of test plaques built in the flat vs. vertical orientation. 50.007 inch (0.178 mm) layer thickness available on Dimension Elite only. 6Ivory is the only color option for uPrint.