Enquiries ?

(required)

(required)

(required)

Your Message

Fortus 400mc 3D Systems

Fortus 400mc 3D production systems

Flexible, fast, predictable, and simple to operate. Manufacture Real Parts™ in a wide range of thermoplastics.

The Fortus 400mc™ allows you to manufacture Real PartsTM in-house with multiple production-grade thermoplastics, such as ABS-M30, PC, PPSF, ULTEM* 9085, PC-ABS blend and more. Fortus 400mc is a user configurable high-performance workhorse, ideal for creating Real Parts for conceptual models, functional prototypes, manufacturing tools, and end-use parts.

The Fortus 400mc coupled with Insight™ front-end processing software lets you quickly manufacture parts that match your mechanical, thermal, aesthetic and resolution needs. With the Fortus 400mc, you can accurately manufacture Real Parts with complex geometries, that are strong enough not only for functional testing, but end use as well.

REAL PRODUCTION-CLASS SYSTEM

SYSTEM SPECIFICATIONS

BASE SYSTEM CONFIGURATION

Build Envelope (XYZ) 14 x 10 x 10 inches (355 x 254 x 254 mm)
Material Delivery One (1) Build material canister 92 in3 (1508 cc)
One (1) Support material canister 92 in3 (1508 cc)

UPGRADE CONFIGURATION

Build Envelope (XYZ) 16 x 14 x 16 inches (406 x 355 x 406 mm)
Material Delivery Two (2) Build material canisters 92 in3 (1508 cc)
Two (2) Support material canisters 92 in3 (1508 cc)
Auto changeover between canisters

MATERIAL OPTIONS

Fortus 400mc 3D Systems

OTHER SPECIFICATIONS

System Size/Weight 50.45 x 35.25 x 77.25 inches
(1281 x 895.35 x 1962 mm)
With crate: 1511 lbs. (687 kg)
Without crate: 1309 lbs. (593 kg)
Achievable Accuracy Parts are produced within an accuracy of +/- .005 inch or +/-.0015 inch per inch whichever is greater (+/- .127 mm or +/- .0015 mm per mm whichever is greater)+

+Note: Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield. See Fortus 400mc/360mc accuracy white paper for more information.
Network Communication 10/100 base T connection. Ethernet protocol.
Operator Attendance Limited attendance for job start and stop required.
Operating Environment Maximum room temperature of 85°F (29.4°C).
Maximum room dew point of 78°F (25.6°C).
Power Requirements 230 VAC, 50/60 Hz, 3 phase, 16A/phase
(20 amp dedicated circuit required)
Regulatory Compliance  CE
Software All Fortus systems include Insight™ and Control Center™ job
processing and management software.

At the core:
Advanced FDM Technology™

Fortus systems are based on Stratasys FDM — Fused Deposition Modeling™ — technology. FDM is the industry’s leading additive manufacturing technology, and the only one that uses production grade thermoplastics, enabling the most durable parts.

Fortus systems use a wide range of thermoplastics with advanced mechanical properties so your parts can endure high heat, caustic chemicals, sterilization, and high impact applications.

No special facilities needed

You can install a Fortus 3D Production System just about anywhere. No special venting is required because Fortus systems don’t produce noxious fumes, chemicals, or waste.

No special skills needed

Fortus 3D Production Systems are easy to operate and maintain compared to other additive fabrication systems because there are no messy powders or resins to handle and contain. They’re so simple, an operator can be trained to operate a Fortus system in less than 30 minutes.

Get your benchmark on the
future of manufacturing

Fine details. Smooth surface finishes. Accuracy. Strength. The best way to see the advantages of a Fortus 3D Production System is to have your own part built on a Fortus system. Get your free part at: www.fortus.com/benchmark