ABSplus™ – P430 (Traduction en cours)
ABSplus is a true production-grade thermoplastic that is durable enough to perform virtually the same as production parts. When combined with Dimension 3D Printers, ABSplus is the ideal solution to printing 3D models in an office environment.
Mechanical Properties1 |
Test Method |
English |
Metric |
| Tensile Strength (Type 1, 0.125”, 0.2”/min) | ASTM D638 | 5,300 psi | 37 MPa |
| Tensile Modulus (Type 1, 0.125”, 0.2”/min) | ASTM D638 | 330,000 psi | 2,320 MPa |
| Tensile Elongation (Type 1, 0.125”, 0.2”/min) | ASTM D638 | 3% | 3% |
| Flexural Delamination | ASTM D790 | 4,500 psi | 31 MPa |
| Flexural Strength (Method 1, 0.05”/min) | ASTM D790 | 7,600 psi | 53 MPa |
| Flexural Modulus (Method 1, 0.05”/min) | ASTM D790 | 320,000 psi | 2,250 MPa |
| IZOD Impact, notched (Method A, 23°C) | ASTM D256 | 2.0 ft-lb/in | 106 J/m |
Thermal Properties2 |
Test Method |
English |
Metric |
| Heat Deflection (HDT) @ 66 psi | ASTM D648 | 204°F | 96°C |
| Heat Deflection (HDT) @ 264 psi | ASTM D648 | 180°F | 82°C |
| Glass Transition Temperature (Tg) | DMA (SSYS) | 226°F | 108°C |
| Melt Point | – – – – – – – – – | Not Applicable3 | Not Applicable3 |
| Coefficient of Thermal Expansion | ASTM E831 | 4.90E-05 in/in/°F | – – – – – – – – – |
Electrical Properties4 |
Test Method |
Value Range |
| Volume Resistivity | ASTM D257 | 3.0x10e14 – 6.0x10e13 ohms |
| Dielectric Constant | ASTM D150-98 | 2.9 – 2.6 |
| Dissipation Factor | ASTM D150-98 | .0053 – .0046 |
| Dielectric Strength | ASTM D149-09, Method A | 320 – 100 V/mm |
| Dielectric Strength | IEC 60112 | 28.0 kV/mm |
Other2 |
Test Method |
Value |
| Specific Gravity | ASTM D792 | 1.04 |
| Flame Classification | UL94 | HB |
System Availability |
Layer Thickness Capability |
Support Structure |
Available Colors |
| uPrint uPrint Plus Dimension Elite Dimension SST 1200es Dimension BST 1200es |
0.013 inch (0.330 mm) 0.010 inch (0.254 mm) 0.007 inch (0.178 mm)5 |
Soluble Supports Breakaway Supports (BST 1200es only) |
Ivory6 White Black Dark Grey Red Blue Olive Green Nectarine Fluorescent Yellow |
The information presented are typical values intended for reference and comparison purposes only. They should not be used for design specifications or quality control purposes. End-use material performance can be impacted (+/-) by, but not limited to, part design, end-use conditions, test conditions, color etc. Actual values will vary with build conditions. Product specifications are subject to change without notice.
1Build orientation is on side long edge. 2Literature value unless otherwise noted. 3 Due to amorphous nature, material does not display a melting point. 4All Electrical Property values were generated from the average of test plaques built with default part density (sparse). Test plaques were 4.0 x 4.0 x 0.1 inches (102 x 102 x 2.5 mm) and were built both in the flat and vertical orientation. The range of values is mostly the result of the difference in properties of test plaques built in the flat vs. vertical orientation. 50.007 inch (0.178 mm) layer thickness available on Dimension Elite only. 6Ivory is the only color option for uPrint.